| General Features |
| Operating Environment |
Rapid deployment in harsh environmental conditions |
| Configuration |
Ability to configure the system with different antenna selections, interfaces, and custom configurations |
| Operating Modes |
Operating modes: Idle, north calibration, manual mode, scan mode, and automatic tracking mode |
| Automatic Tracking Capability |
Automatic tracking capability using GNSS input or RSSI |
| Automatic/Manual Antenna Selection |
Automatic/manual antenna selection, switching based on signal strength or distance |
| Antenna Control Unit |
Integrated internal antenna control unit or accessible via external remote interface |
| Payload Units |
Mechanical interface for internal RF/modem equipment or external communication payloads |
| Mobility Capability |
Movement capability in azimuth and elevation axes |
| Communication |
Full duplex point-to-point communication (simultaneous bidirectional communication) |
| Diagnostic Status |
Health monitoring, alarms, and BIT (Built-In Test) functions |
| RF & Electrical Parameters |
| Antennas |
| Antenna Types |
Directional and omnidirectional antennas |
| Frequency Range |
L-band (1.3–1.5 GHz), S-band (1.7–2.7 GHz), and C-band (4.4–5.85 GHz) antenna options |
| Antenna Types (2) |
Parabolic reflector antenna, monopole antenna |
| Polarization |
Vertical, horizontal, or dual-polarized antennas |
| Antenna Gains |
For antenna gain and detailed RF parameters, contact [email protected] |
| Electrical Features |
| EMI/EMC |
MIL-STD-461F compliant (CE102, CE106, CS101, etc.) and RTCA/DO-160 ESD |
| Environmental Parameters |
MIL-STD-810G compliant (Temperature, altitude, solar radiation, rain, humidity, salt fog, dust, vibration, shock, icing tests) |
| Power Compatibility |
MIL-STD-1275E power input compliance |
| Power Consumption |
500 W nominal, 700 W maximum (including communication equipment) |
| Operating Voltage Range |
28V nominal (18–32V operating range) |
| MTBF (Mean Time Between Failures) |
6500 hours (at 45°C, GF environment) |
| Orientation & Auto-Tracking |
| Speed |
Max azimuth speed: 24°/s, 40°/s, or 90°/s; max elevation speed: 16.2°/s |
| Acceleration |
Max azimuth acceleration: 50°/s²; max elevation acceleration: 50°/s² |
| Torque |
30 Nm |
| Tracking Accuracy |
Tracking accuracy of 0.3 degrees |
| Coverage Area |
360° pan, 100° tilt |
| Tracking Methods |
Conical, serpentine, and spiral scanning methods |
| Automatic North Calibration |
Compass, dual GPS (optional), external calibration kit (optional) |
| Interfaces |
| Internal Connection Interfaces |
Slip-ring (data & power), single or dual optional RF rotary joint connection |
| External Connection Interfaces |
Ethernet, serial ports (RS232, RS422), power interfaces |
| Software Control Interfaces |
Web interface for monitoring/control, UDP/IP or serial-based control protocol for ground terminal integration |
| Antenna Control Unit |
Internal or external antenna control unit |
| Connectors |
Military-grade MIL-DTL-38999 connectors for power/data; RF connectors (N-Type, TNC, or SMA) |
| Mechanical Parameters |
| Dimensions |
Directional antenna + tripod height <3 m; horizontal sweep up to 1.2 m |
| Weight |
<50 kg |
| Setup Time |
Setup in under 15 minutes by two personnel |
| Wind Load Resistance (Operational) |
Operational up to 45 knots wind |
| Wind Load Resistance (Survival) |
Survives up to 70 knots wind |
| Accessories |
| Cable Set |
| Calibration Kit |
| RF Switching Capability |
| Tripod |
| Packaging/Carrying Case |
